United CoolAir

  • Home
    • About United CoolAir
    • News
    • HVAC Technical Resources
    • Tech Info
    • Careers
      • Apply Here
      • Job Fairs
  • Portable ECU
    • Portable Inquiry
    • Portable Literature
    • Portable IOMs
    • Portable Videos
  • Products
    • Horizontal
    • Vertical
    • Portable
    • 100% Outside Air
    • EZ-Fit / VAV
    • Controls
  • Literature
    • Sales Brochures
    • Engineering Guides
    • Engineering Guide Specs
    • Drawings
    • Commercial IOMs
    • Controls Installation Manuals
    • Control Sequences SOO
  • Rep Login
  • Contact
    • Staff
    • General Inquiry
    • Parts/Service Inquiry
    • Portable Inquiry

August 30, 2019 by Matt Hanson

What is a Heat Pump and how does it work?

Heat pump

A heat pump represents a growing segment of the HVAC industry. In practical terms, it is a reversal of how the air conditioning system works. While air conditioners are used to cool air; a heat pump can be used to cool or heat the air. This is especially true conditions are in place for this use. Therefore, it is necessary to employ a heat pump where temperatures are more moderate. The Summer months of the mid-south area of the United States contains the ideal  conditions for this type of system. Conversely, they can be converted into a heating application when the temps are a bit cooler. In areas such as Florida or California where temperatures are mostly warm, it is best to use an air conditioner only.

The Heat Pump Refrigeration Cycle

Heat pumps use a reverse refrigeration cycle as opposed to the regular vapor compression cycle of an ac unit. Heat pumps use the condenser section to generate heat whereas an air conditioner uses it to reject heat. A heat pump uses a small amount of energy to move heat from one location to another. In a similar way it can cool a building or office space by working in reverse.

Air conditioners and heat pumps work in a very similar way. The biggest advantage to a heat pump is to negate the unit handling the separate loads of heating and cooling. Since the heat pump is only transferring heat it can operate by electricity. Additionally, the unit does not rely on the burning of fuel to accomplish the process.

In the cooler months, a reversing valve reroutes the refrigerant path making the outdoor condensing coil function as the evaporator. In a likewise manner the indoor coil serves as the condenser. The evaporator absorbs the outdoor heat and is in turn used by the condenser to heat the indoor space. However, there is one remaining problem. The outdoor evaporator absorbs heat and must operate at temperatures lower than the outside air. This low operating temperature causes ice to build-up on the outside of the evaporator. Finally, auxiliary heat is used during the defrost cycle to provide indoor heat during this stage.

Filed Under: News Tagged With: #airconditioner, #hvacinstall, #hvacquality, #hvacservice, #hvacsystem

April 9, 2019 by Matt Hanson

Business Owners Guide to Commercial HVAC

When business owners are in need of a new or replacement HVAC system, there may be many questions that arise. First and probably most importantly is the cost. However, cost not only pertains to the price of the equipment, but to the installation cost as well. Equipment cost will vary from one brand to another and between companies performing the install. Since most buyers are usually not HVAC experts, they often defer to the expertise of the engineer or contractor and may not search or understand that there are alternatives.

When it comes to Commercial HVAC systems many can be quite large. Furthermore, in many cases they were installed when the building was under construction. Typically, an HVAC system consists of condenser section placed on the rooftop or outside the perimeter on the ground. While outdoors these units are susceptible to weather damage and vandalism. Next, the installation of an evaporator section takes place, usually inside a mechanical room where it cannot be easily relocated.

How Replacements can be Made Easier

Generally, HVAC units need to be replacement after just a few decades. However, replacing an existing unit can be a very involved process. Installers routinely tell building owners that replacing the unit would be a daunting task. To complete the retrofit installation, it is often recommended to remove some of the walls or part of the roof. The reason is although the old unit can be chopped up and removed, it is very difficult to get a replacement unit in the space. Additionally, a crane is often needed to hoist the replacement unit into place, especially if the height of the building is several stories.

The total cost of an installation is broken down into separate categories; labor materials, and tasks. Installation companies will compute hourly wage times how many laborers it will take to complete the change out. Other expenditures could include permits, insurance, supervision, warehouse, crane rental, and delivery. 

The selection of the proper HVAC system is yet another consideration. Owners, architects, engineers, and contractors have the choice of chilled water, refrigerant direct expansion, packaged, air-cooled, water-cooled, and VRF systems. Will the system be a central or floor-by-floor method? Each of these will have pro and cons and can be one of the more difficult decisions to be made. Sometimes decisions are based on building codes.  Historic districts usually have restrictions on placing units outdoors or on the rooftop.

There is a better way!

For retrofit installations, the design of United CoolAir  (UCA) products helps avoid all of the unnecessary costs that can occur. This is due to United CoolAir’s design that involves a complete indoor installation. This factor alone saves the unit from weather damage and potential vandalism. Additionally, UCA units are built as modular units that fit through doorways, meaning there is never a need for expensive rigging or demolition of the building. UCA units can also fit into historic buildings, thus avoiding the aggravation of code restrictions. Additional permits or non-allowance for outdoor equipment. United CoolAir HVAC units not only save in installation cost but their units last longer over the competition.

Filed Under: News Tagged With: #construction, #hvac, #hvacservice

Please follow & like us :)

Follow by Email
Facebook
Facebook
fb-share-icon
Twitter
Visit Us
Tweet
YouTube
LinkedIn
LinkedIn
Share
Get new posts by email
Association Logos

Posts

Recent Posts

  • BTUs in Air Conditioning
  • Commercial vs Residential HVAC
  • Packaged HVAC Indoor vs Outdoor
  • Improving Indoor air hygiene
  • How HVAC Retrofit Can Benefit Commercial Buildings

Calendar

May 2022
M T W T F S S
 1
2345678
9101112131415
16171819202122
23242526272829
3031  
« Mar    
  • Privacy Policy

UCA Logo

491 E. Princess St.
York, PA 17403
(717) 843-4311
Fax: (717) 854-4462

Please follow & like us :)

Follow by Email
Facebook
Facebook
fb-share-icon
Twitter
Visit Us
Tweet
YouTube
LinkedIn
LinkedIn
Share

Reference LInks

  • Privacy Policy

Site Search

Serial Search

Example

serial no example

© 2022 · United CoolAir, LLC